An Ultimate Guide On How To Square A Board With A Table Saw 
Posted in: Commercial,Residential
On September 11, 2021

Square panels appear a lot in life. However, it may not appear when you need it. Fortunately, popular saws like the table saw can help you create square boards.

So, how to square a board with a table saw? You can follow the instructions:

  • Check the edges of the board.
  • Determine the square board measurement
  • Prepare table saw
  • Make a straight and square edge cut on the board
  • Cut the remaining edges with a straight cut

Please read the next shares for detailed step-by-step instructions!

What Do You Need To Square a Board With a Table Saw?

table saw

In addition to the two main items, the table and the table saw (The top best table saw under 500 here), you also have to prepare the following tools:

  • Fence
  • Pencil and ruler
  • Splitter
  • Protective gear (glasses, earplugs, masks)

Perhaps the table saw is your familiar tool, but creating a square table from a table saw is not simple. Having you prepare all the necessary supplies will help you get a perfect result.

With additional tools, you can work faster. Mistakes such as wrong angle or wrong cut will not occur. You may save a lot of time and effort.

How To Square A Board With A Table Saw?

Not every woodshop can provide you with square boards. You will probably have to square a board yourself many times. The following instructions are a detailed plan, but the implementation is straightforward.

1. Check Table Edges And Determine Square Board Measurements

table saw

The first step to square a board is to check the piece of wood. You need to make sure it can accommodate the square board size you want.

It is also crucial that you check whether the edges of the board are straight or concave. If the wood already has a straight edge, you don’t need to create the first straight edge. The ready-made straight edge will help you skip a step.

To ensure that the square plank can work properly, you should use a ruler and pencil to measure and mark. You should use a pencil to draw straight lines on the rough side of the wood.

Measuring and marking the edges will ensure your square board is flawless. Sometimes the square board needs to be slightly angled, and it can’t be used.

Even if you are a professional table saw user, you should still measure and mark. Otherwise, the result could be a pear-shaped board.

This first step is significant. You have to pay more attention, especially to the marking.

2. Prepare Table Saw

After you have checked and processed the table, you need to prepare a good . A good table saw preparation would help you make perfect and effortless cuts.

table saw

Fence Installation

To cut square boards with a table saw most effectively, you need to use a fence. The fence will ensure the width and size of the square plank are as you desire.

You will place the fence on the right side of the saw blade and make sure the excess board cuts off to the left of the saw blade.

Saw Blade Selection and Installation

Each plank will be a different type of wood. Depending on the type of wood you use, you need to choose the most suitable saw blade. The right saw edge will give you a smooth cut and won’t burn the wood.

The saw blade also needs to have the right height for better cutting. You should place the saw blade higher than the top surface of the board. It will help you see the cut clearly and make more precise cuts.

If you want a smooth cut, then use a Splitter before the saw blade. It makes the separation process smoother and faster.

Take Safety Measures

In addition to preparing the saw blade for good cuts, you need to protect yourself from protective gear. You should wear glasses, earplugs, and a mask to protect your senses from wood dust.

3. Performing a Straight Edge Cut on the Board

table saw

After you have prepared all the necessary things, you will proceed to do the main work.

First, plug-in power and start the table saw. When the saw blade reaches the fastest speed, select an edge on the wood and cut the line according to the previous symbol.

This step is the first step to create a straight edge to make it easier to square the piece of wood. You should push the plank slowly into the saw blade. Be careful not to make a skewed cut.

4. Cut Remaining Edges With Straight Cut Line

To cut the following square edges, adjust the fence to the most suitable size. Change the edge in contact with the saw blade and do the same as cutting the first edge.

Cutting the remaining edges will become a lot easier than the first time. You will now have a straight, square edge to lean against the fence and mark on the board. You need to push as well as push the wood towards the fence more.

table saw

You should cut pairs of sides parallel to each other because they are the same size, so you don’t need to move the fence too many times.

5. Finishing

After completing the straight cut for the final edge, you can get the square board to your desired size.

Many table saws will provide additional protractors or skateboards. You might use the tools that come with this table saw to work more efficiently and accurately.

What Do You Need To Keep In Mind To Make Square A Board?

To create a perfect square board, you need to follow each step carefully. Here are some tips to support you do better.

  • You should measure and mark the lines as well as before cutting.
  • You should let the saw blade reach the highest speed before starting to cut.
  • Stop the table saw after every cut and look at the board.
  • Use a protractor to get the most accurate right angle.
  • Please wear protective clothing to protect yourself while working.

Conclusion

A square board is one of the necessary items. Our how-to squares a board with a table saw tutorial will help you do it right the first time.

If you have any questions about the article content, feel free to contact us as soon as possible. Thank you for following this post!

Read more:
home entryway lighting
Amazing Home Entryway and Foyer Lighting Design Ideas

Close